Putting Into Operation; Factory Settings Reset; Language Settings; Programming - Abus AZWG10020 Installation And Operating Instructions Manual

10. Putting into operation

Once all necessary connection work has been completed, close the housing.
Details can be found at the beginning of Section 9 (Installation).
You can now begin putting the product into operation.
Supply power to the device.

10.1 Factory settings reset

In order to ensure that all existing settings are deleted, a factory settings
reset is recommended with a new installation.
1. Press and hold the 9 key. Disconnect the power from the device
and then reconnect it. "Initialising" appears on the display. The fol-
lowing then appears on the display.
2. Now release the 9 key.
3. Press ENT to perform a factory reset and get to the language set-
tings.
Press ESC to cancel the factory reset. The display switches back
to standby mode.

10.2 Language settings

1. Press ENT. You can now select the language.
Press ESC to cancel the language setting. The factory reset is per-
formed. The display switches back to standby mode.
2. Use the arrow keys to select the desired language.
German, French, Dutch, Danish, Italian, Polish, or English.
3. Confirm with ENT. The device switches to the selected display
language and returns to standby mode.

11. Programming

The programming menu allows you to configure the device.
It also provides a range of testing options to check your settings and identify
any errors.
For a detailed table showing all the main menu items and all sub-
menu items, see the Appendix.
Menu item
Contact Details
Change Language?
↑↓ [ENT] to Select
Description
Used for creating and managing up to ten contact
names and their telephone numbers, and for selecting
the relevant message type (text or voice).
18 UK
Factory Reset?
[ENT] or [ESC]
[ENT] or [ESC]
English