Table of Contents
Advertisement
>
Press OK to go to the entry window used to program-
me a new timer event. (Fig. 7-20)
To programme a timer event, proceed as follows:
Source
>
Use the arrow keys to mark the column Source.
>
Press OK to enter the desired source (TV or Radio).
>
Use the arrow keys up/down to mark the desired
source (TV or Radio).
>
Press OK.
>
Use the arrow keys to mark the column Channel.
>
Press OK.
Depending on the previous setting, either the TV or
the radio programme list will now be displayed.
>
Use the arrow keys to mark the desired program-
me.
>
Use the arrow keys up/down to move the marker
around the list one line at a time.
>
Use the arrow keys right/left to move the marker
backward or forward in the list one page at a time.
>
Press OK to accept this into the timer programming.
Date
>
Use the arrow keys to mark the column Date.
>
Use the numeric keys to enter the date on which
you wish to record a programme.
Start
>
Use the arrow key right to mark the column
Start.
>
In this line, use the numeric keys to enter the star-
ting time for the timer.
Stop
>
Repeat the steps as described under "Start" to enter
the stopping time.
Repeat
>
Use the arrow keys to mark the column Rep.
>
Press OK.
A selection window will be displayed, offering various
suggested repeating intervals.
1x
Timer used once only
T
Daily repeat
1 W
Repeat once weekly
1-5
Repeat only on weekdays
6-7
Repeat only on weekends
>
Use the arrow keys up/down to select the desired
function.
>
Press OK to accept the setting into memory.
31
(Fig. 7-20)
Advertisement
Table of Contents
