TechniSat DigiPal 2 Operating Manual page 14

For reception of dvb-t programmes

Hide thumbs Also See for DigiPal 2:

Table of Contents

(Fig. 5-6)

(Fig. 5-7)

(Fig. 5-8)

Press the OK key now to confirm, and an automatic

programme scan will be carried out. The entire recep-

tion range of the receiver will be scanned for digital

programmes This procedure may take several minu-

tes. Please note any messages displayed on the

screen (Fig. 5-6).

Updating the software

When the programme scan has been completed, the digital

receiver will check whether a new version of the software is

available for your unit. If a new version is available, you can

perform an automatic software update.

Use the arrow keys left/right to select the field

Update, and confirm by pressing OK. (Fig. 5-7) The

new software for the receiver will now be downloaded.

This procedure may take several minutes.

Exiting from the installation assistant

Read the message displayed (Fig. 5-8) and confirm by

pressing OK, to return to normal operation.

Table of Contents