Table of Contents
Advertisement
Transferring data into memory
>
When you have completed the programming, press
the yellow function key Accept to transfer the data
into memory.
If under Programme you have selected a program-
me that is blocked as per Point 8.3, you must first
enter the PIN code before the data will be accepted
into memory.
>
Press the TV/Radio key to return to normal opera-
tion.
Timer overview
The timer overview function will display a list of all timer
events already programmed.
>
To display the menu Timer overview, call up the
menu Timer organizing as described above.
>
Use the arrow keys up/down to mark the line
Timer overview.
>
Confirm by pressing OK.
If there is an overlap of timer events, these overlaps will
be marked in red.
Changing timer programming
>
To change an existing timer setting, use the arrow
keys up/down to mark the timer even t you wish to
change.
Press the yellow function key Change to move to
the settings of the marked timer. You can now effect
the changes as described in Point 7.15.1.2.
>
When you have completed the programming, press
the yellow function key Accept to transfer the data
into memory.
Deleting timer programming
>
To delete an existing timer setting, use the arrow
keys up/down to mark the setting.
>
Press the green function key Delete.
The message will be displayed:"Do you really want to
delete this timer?"
>
Use the arrow keys right/left to mark Yes.
>
To delete the timer entry, confirm by pressing OK.
>
Press the TV/Radio key to return to normal operation.
Programming a new timer event
>
To programme a new timer event, use the arrow
keys up/down to mark a free line in the menu
Timer overview.
>
Press the yellow function key New to go to the entry
window used to programme the new timer event. Work
through this as described above.
32
Advertisement
Table of Contents
