Advertisement
LAUNCH
Disconnect the ECU system before any welding operation.
Be careful for the operation near the ECU or sensor, to avoid
damage to the ECU and sensor.
Properly connect the ECU harness connector, to avoid damage to
the electronic components inside the ECU, such as the
integrated circuit.
Attentions for Device Usage
This device is a precision electronic instrument. Be sure no impact
during using.
Take the device carefully, to avoid collision.
Turn the ignition to OFF position when insert or remove the OBD
connector.
If the vehicle is not going to be used for a week or more, to ensure
that the battery holds its charge well, it is recommended to
unplug the connector.
In the use of the product, it is not recommended to use
communication functions, such as telephone and SMS, which
may lead to interruption of program data communication. If this
occurs, please operate the related functions again.
3
TS971 User's Manual
Advertisement
