FP PostBase Vision Installation And Safety page 14

14
PostBase Vision
Connection
Computer Network / Router
Power connection (electric)
Warning! Danger from electrical voltage if
improperly connected.
• Use the supplied power and connection
cables or cables that have been approved
by Francotyp-Postalia. Make sure that the
cables are not damaged.
• Only connect the PostBase Vision to a
grounded single-phase power socket.
Make sure that the power connection con-
forms to the power requirements indicated
on the type plate.
• Make sure that the power socket is nearby
and easily accessible at all times.
Ethernet cable
Power cable
If you want the PostBase Vision to use the
wired connection to your local area network
(LAN):
• Connect the Ethernet cable to the franking
machine and the local network / router.
• Plug the power cable into the power
connection for the franking machine.
• Only then plug the power cable into the
power socket.