Step 3: Assembling The Sealer (Optional) - FP PostBase Vision Installation And Safety

Hide thumbs Also See for PostBase Vision:

Table of Contents

PostBase Vision

Step 3: Assembling the sealer (optional)

The sealer is positioned to the left of the

franking machine instead of the hand feed

tray. The catches on the right side of the

sealer and slots (on the left side of the bottom

side of the franking machine) mechanically

couple the two components and fasten them

in position relative to each other.

Assembling the sealer

• Place the sealer to the left of the franking

machine.

• Gently lift the franking machine on the left

side and push the sealer towards the frank-

ing machine so that the front sides are

flush.

• Carefully lower the franking machine so

that the catches of the sealer engage in the

slots on the bottom side of the franking

machine.

Filling with sealing liquid

• Swivel the cover of the filling opening to the

side.

Table of Contents

Do you have a question about the PostBase Vision and is the answer not in the manual?