Honda Super Cub 2019 Manual page 47

#
Changing the Answer Back Buzzer
Sound Pattern
You can select buzzer sound from 3 patterns.
Remove the center cover.
a
Make sure that the Honda SMART Key is
b
active.
(P.30)
Push the ignition switch to authenticate the
c
Honda SMART Key system.
Connect the EM mode coupler provided on
d
the battery cover to the EM mode
connector.
(P.109)
The Honda SMART Key indicator and
u
ignition switch ring go off.
Answer back button
(P.78)
(P.34)
Ignition switch
Ignition switch ring
Push the ignition switch 1 time.
e
Repeat the following 3 times:
f
Press the answer back button on the
Honda SMART Key 3 times and the
ignition switch 1 time.
When the answer back button is pressed,
u
the Honda SMART Key LED comes on.
Make sure the LED goes off before
pressing the button again.
If the answer back button or ignition
u
switch is not pressed for 1 minute, the
Honda SMART Key indicator starts
blinking and this mode will be cancelled.
If so, remove the EM mode coupler,
return to and follow the procedure
c
again.
Continued
45