Honda Super Cub 2019 Manual page 43

Press the alarm button to select from 3
g
sensitivity levels.
3 alarm rings: high sensitivity
2 alarm rings: middle sensitivity
1 alarm ring: low sensitivity
The Honda SMART Key indicator and
ignition switch ring come on while setting.
Wait for about 10 seconds until the ignition
h
switch ring starts blinking. The sensitivity
level is set.
Remove the EM mode coupler from the EM
i
mode connector to finish setting.
The sensitivity level is also set if you
u
remove the EM mode coupler before the
ignition switch ring starts blinking.
Store the EM mode coupler on the battery
j
cover. Reinstall the parts in reverse order.
#
If the Anti-Theft Alarm System Does
Not Operate Properly
If any of the following situations arise, the
battery ( P. 76) in the motorcycle may be
2
discharged or there is a system problem.
Remove the battery and see your dealer.
The alarm does not ring.
The alarm rings but fades out.
The alarm system does not stop.
41