Honda Super Cub 2019 Manual page 116

Tire Puncture
u
Installation
Attach the side collars to the wheel.
1.
Position the wheel between the fork legs
2.
and insert the front axle shaft from the
right side, through the wheel hub and
right fork leg.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Tighten the front axle nut.
3.
Torque: 44 lbf·ft (59 N·m, 6.0 kgf·m)
114
Removing Wheels
After installing the wheel, apply the brake
4.
lever several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.