Honda Super Cub 2019 Manual page 46

Answer Back System
Push the ignition switch 1 time.
e
Repeat the following 3 times:
f
Press the answer back button on the
Honda SMART Key 2 times and the
ignition switch 1 time.
When the answer back button is pressed,
u
the Honda SMART Key LED comes on.
Make sure the LED goes off before
pressing the button again.
If the answer back button or ignition
u
switch is not pressed for 1 minute, the
Honda SMART Key indicator starts
blinking and this mode will be cancelled.
If so, remove the EM mode coupler,
return to
c
again.
44
(Continued)
and follow the procedure
Press the answer back button to select from
g
3 levels for the sound volume.
The Honda SMART Key indicator and
ignition switch ring come on while setting.
Wait for about 10 seconds until the ignition
h
switch ring starts blinking. The sound
volume level is set.
Remove the EM mode coupler from the EM
i
mode connector to finish setting.
The sound volume level is also set if you
u
remove the EM mode coupler before the
ignition switch ring starts blinking.
Store the EM mode coupler on the battery
j
cover. Reinstall the parts in reverse order.