Honda Super Cub 2019 Manual page 117

#
Rear Wheel
Removal
Support your motorcycle securely and
1.
raise the rear wheel off the ground using
the center stand or a hoist.
Remove the chain covers.
2.
Remove the rear brake adjusting nut.
3.
Disconnect the brake rod from the brake
4.
arm.
Disconnect the brake stopper arm from
5.
the brake panel by removing the cotter
pin, brake stopper arm nut, washer and
rubber grommet.
Remove the rear axle nut and washer,
6.
then loosen the drive chain lock nuts and
drive chain adjusting nuts.
Drive chain
lock nut
P. 92
2
Brake
arm
Rear brake adjusting nut
7.
8.
Tire Puncture
Adjusting plate
Drive chain Rear axle nut/Washer
adjusting nut
Brake stopper arm nut
Remove the rear axle shaft, chain
adjusting plates and side collars, then
remove the drive chain from the driven
sprocket by pushing the rear wheel
forward.
Remove the rear wheel from the
swingarm.
Removing Wheels
u
Brake rod
Brake
stopper
Cotter
arm
pin
Continued
115