Honda Super Cub 2019 Manual page 96

Drive Chain Adjusting the Drive Chain Slack
u
Turn both adjusting nuts an equal
6.
number of turns until the correct drive
chain slack is obtained. Turn the adjusting
nuts clockwise to tighten the chain. Turn
the adjusting nuts counterclockwise to
provide more slack.
Adjust the slack at a point midway
between the drive sprocket and the
driven sprocket.
Check the drive chain slack.
94
7.
8.
P. 91
2
Torque: 44 lbf·ft (59 N·m, 6.0 kgf·m)
9.
10.
Check rear axle alignment by making sure
the end of the chain adjusting plate aligns
with the scale graduations on both sides
of the swingarm.
Both marks should correspond. If the axle
is misaligned, turn the right or left
adjusting nut until the marks are aligned
and recheck chain slack.
Tighten the rear axle nut.
Hold the adjusting nuts and tighten the
lock nuts.
Recheck drive chain slack.