Honda Super Cub 2019 Manual page 112

Unlock the Ignition Switch in an Emergency
#
ID number input
You can input your ID number by pressing
the ignition switch when the ignition switch is
OFF or (Lock) position. Input the ID
number on the ID tag in order from the left
in turn by pressing the ignition switch.
The ID number is authenticated according to
the number of times the ignition switch is
pushed.
Push the ignition switch the desired number
of times within 5 seconds when the ignition
switch ring comes on. After 5 seconds, the
ignition switch ring goes off and comes on
again. This means that the inputted number
is fixed, and you can input the next number.
If the ignition switch ring does not come
u
on in blue, the battery may be low.
Contact your dealer.
110
Example:
To input "0", wait for 5 seconds without
●
pushing the ignition switch when the
ignition switch ring comes on.
To input "1", push the ignition switch once
●
within 5 seconds when the ignition switch
ring comes on.
To input "0"
ID number
To input "1"
ID number
Ignition switch
No push
Ignition switch
Push one time