Starting Up And Shutting Down; Starting Up; Shutting Down - Sony UPA-PC110 Operating Instructions Manual

Starting Up and Shutting Down

Starting Up and Shutting Down

Starting Up

1
Make sure that the peripheral devices are switched
on, and then switch on the main switch at the user
interface panel on the back of the unit.
SCSI USB
I
LAN
O
PARALLEL RS-232C
2
Press the power switch on the back of the display.
The power lamp on the operation panel lights, and
the unit starts.
10
AC IN

Shutting Down

1
Terminate software on the main unit as explained
in the instructions provided with the software.
When the software closes, the operation panel
power goes off as well.
2
Make sure that the power lamp on the operation
panel is off, and then switch the main power switch
OFF.
3
Switch off the peripheral devices.