Advertisement
PHASE 2 – INSTALLATION
2.1 ATTACH WALL BRACKETS TO THE END PANELS
2.1.1 • Lift the assembled workbench to the vehicle, then put it in place.
• Attach the wall bracket to the panels aligning the brackets to the horizontal rim of the vehicle.
For technical support, contact us at 1-800-565-5321
TOOLS
HORIZONTAL RIM
q Cordless Impact
q 1/2" Socket
BRACKET
HARDWARE USED
4×
hand
S3-WA48-1 Installation Guide | REV. A2 | Page 9
-
tighten the bolts
#90-114 Hex Bolt 1/4" × 1"
#98-106 Flat Washer
#94-112 Serrated Nut
Advertisement
