Advertisement
PHASE 2 – INSTALLATION
2.3 ATTACH PLUS NUTS
2.3.1 • Remove the assembled workbench and place on the side.
• Drill all the marks using 1/2" drill bit w/ drill collar, then attach plus nuts to the holes.
NOTE: Use 1/2" drill bit with drill collar to stop drill at 1/2" depth.
WARNING: Before drilling, ensure that you will not hit any critical parts of the vehicle like the Gas tank,
Wiring Harness and Hose.
For technical support, contact us at 1-800-565-5321
PLUSNUT
Drill all the marks then, attach plus nuts to the
holes.
TOOLS
q Cordless Drill
q 1/2" Drill Bit w/ Drill Collar ( Set at 1/2" )
q Plus Nut Tool ( 5/16" )
HARDWARE USED
8×
#94-132 Plus Nut
S3-WA48-1 Installation Guide | REV. A2 | Page 11
DRILL COLLAR
(
1/2" )
seT aT
Advertisement
