Advertisement
1.2.3 Screw the hardwood top on the side panel brackets with the back of the hardwood top
flushed against one end of the panels.
NOTE: Pre-drill the hardwood using 3/16" drill bit first before screwing the side panel brackets to
the hardwood to prevent spliting the wood.
BACK
FLUSHED
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Impact
q Cordless Drill
q 3/8" Driver Bit
q 3/16" Drill Bit
HARDWARE USED
8×
#92-102 Screw #14 × 1"
S3-WA48-1 Installation Guide | REV. A2 | Page 7
70-810
Advertisement
