PHASE 2 – INSTALLATION
2.5 ATTACH WALL BRACKETS
Without ranger Wall kits
2.5.1 Align the wall brackets to the plus nuts, then install the wall brackets to the wall.
OTE: Tighten the bolts that attach the bracket to the wall or wall rails 1
N
tightening the bolts from the brackets to the end panels.
IMPORTANT: After installation is completed, ensure all bolts are tightened.
For technical support, contact us at 1-800-565-5321
before
st
TOOLS
q Cordless Impact
q 1/2" Socket
HARDWARE USED
4×
#90-212 Hex Bolt 5/16" × 1-1/4"
#98-122 Lock Washer
#98-116 Flat Washer
#94-132 5/16" Plusnut
S3-WA48-1 Installation Guide | REV. A2 | Page 15