Required Items - Ranger design S3-WA48-1 Installation Manual

QUICK START GUIDE
Phase 1 - Assembly
q 1.1 Setup...............................................................................................................................................
q 1.2 Workbench Assembly......................................................................................................................
Phase 2 - Installation
q 2.1 Attach Wall Brackets To The End Panels........................................................................................
q 2.2 Mark Holes For Plus Nuts...............................................................................................................
q 2.3 Attach Plus Nut...............................................................................................................................
q 2.4 Attach Partskeeper Cabinet To the Floor........................................................................................
q 2.5 Attach Wall Brackets......................................................................................................................

REQUIRED ITEMS

2
PERSONS
q Cordless Impact
q Cordless Drill
q Tape Measure
q Marker
q 1/2" Socket
q 1/2" Drill Bit w/ Drill Collar ( Set at 1/2" )
q 3/16" Drill Bit
q 3/8" Driver Bit
q Knife
q Plusnut Tool / Plusnut Gun ( 5/16" )
3 - 5
5 - 8
9
10
11 - 12
13 - 14
15 - 16