Advertisement
With ranger floor
2.4.2 • Lift the workbench inside the van, then put it in place.
• Install the workbench to the floor mounting track by sliding bolts in the mounting tracks,
and screwing the bottom shelf to the floor.
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Impact
q 3/8" Driver Bit
q 1/2" Socket
HARDWARE USED
2×
floor fastener kit
#92-102 Screw 1"
HARDWARE USED
2×
floor fastener kit
#90-490 Carriage Bolt 5/16" × 1"
#98-116 Lock Washer
#98-122 Flat Washer
#94-104 Hex Nut
S3-WA48-1 Installation Guide | REV. A2 | Page 14
Advertisement
