Huawei ME909u-523 Application Manual page 57

HUAWEI ME909u-523 LTE LGA Module
Application Guide
NOTE
The module's sleep mode is different from working mode or flight mode set using the
AT+CFUN command. The RF will be turned off when the module enters LPM mode using the
command AT+CFUN=0 while the RF will enter DRX mode without being turned off when the
module is in sleep mode. For more details, refer to
Command Interface
The module enters sleep mode automatically when the sleep task detects that all
other tasks agree on the module's sleep. The sleep period of the module depends on
the current working state and circumstance. The period may last for several seconds,
or up to several minutes.
Figure 8-6 Sleep procedure
Issue 04 (2014-12-08)
Sleeping and Waking Up Application Scenarios
Specification.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HUAWEI ME909u-523 LTE LGA Module AT
57