Gnss Positioning - Huawei ME909u-523 Application Manual

HUAWEI ME909u-523 LTE LGA Module
Application Guide
Command
OK
^DATASETRULT: 50
AT^WPDST=1
OK
AT^WPDFR=65535,1
OK
AT^WPQOS=255,500
OK
AT^WPDGP
OK
^POSEND: -1,9

11.6 GNSS Positioning

The GNSS positioning uses both the GPS and GLONASS satellites for positioning.
Command
AT^WGNSS=1
OK
Issue 04 (2014-12-08)
NOTE
XTRA date must be injected before XTRA data is injected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Notify XTRA data injected result.
Set the session type to tracking and positioning.
Set the number of positioning times and the
interval between each positioning for the tracking
and positioning.
Set the positioning service quality. The first
parameter indicates the response time, and the
second indicates the horizontal accuracy
threshold.
Start positioning.
The first value indicates positioning end reason,
and the second indicates the left positioning times.
Description
Set GNSS as the positioning system to use both
the GPS and GLONASS satellites for positioning.
To switch from one positioning system to another,
the module must restart. To switch the module to
use GPS satellites only, run AT^WGNSS=0 and
restart the module.
GPS Application Scenarios
74