HUAWEI ME909u-523 LTE LGA Module
Application Guide
13.2 LED Setting Operations
13.2.1 Reference Process
Command
AT^LEDCTRL=?
^LEDCTRL: (0-2),00003FFF,(0-1),(1-100),(1-100),(1-100),(1-100)
OK
AT^LEDCTRL?
^LEDCTRL: 1
OK
AT^LEDCTRL=0
OK
AT^LEDCTRL=1
OK
AT^LEDCTRL=2,00000001,0
OK
AT^LEDCTRL=2,00000001,1,10,10
OK
AT^LEDCTRL=2,00000001,1,1,1,1,17
OK
AT^LEDCTRL=2,0000000F,1,1,1,1,17
OK
AT^LEDCTRL=2,00007000,1
Issue 04 (2014-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LED Indication Application Scenarios
Description
Check the parameter range supported by
the command.
Query the current LED program, 1
indicates adapting HUAWEI default
program.
Turn off LED function.
Configure HUAWEI default program.
Configure that offline state LED mode is
Permanently off.
Configure that offline state LED mode is
single flash and cycle time is 2s (1s on/1s
off).
Configure that offline state LED mode is
double flash and cycle time is 2s (0.1s
on/0.1s off/0.1s on/1.7s off).
Configure that offline, power on
initialization, register fail no service and
connect to no service state LED mode
are double flash. Cycle time is 2s (0.1s
on/0.1s off/0.1s on/1.7s off).
Configure that register successful on
LTE, connect and transmit state LED
mode are Permanently on.
84