Configuring The Handset; Setting Do Not Disturb; Setting Call Forwarding - Snom M10 KLE User Manual

Configuring the Handset

You can configure the phone using one of two methods:
1 The Features and User settings menus on the phone
2 The WebUI, which you access using your Internet browser
This section describes settings you can change using your
handset For information about settings you can change on the
WebUI, see "WebUI" on page 57
The system administrator can configure additional settings,
including Network settings, Provisioning, and the PIN code by
using the Admin settings menu For more information about this
menu, see the M100 KLE Administrator and Provisioning Manual

Setting do not disturb

When Do Not Disturb (DND) is on for an account, calls to that account will be
rejected.
To turn DND on or off:
1 Press MENU
2 Press q to scroll to Features and press SELECT
3 With DND highlighted, press SELECT
4 Press p or q to select which account DND should apply to*,
then press SELECT
5 Press p or q to choose On or Off
6 Press SET
* Note that DND will apply to all handsets assigned the account

Setting call forwarding

Calls can be forwarded to another phone number always, only when busy, or
after a set number of rings
To set call forward:
1 Press MENU
2 Press q to scroll to Features and press SELECT
3 Press q to scroll to Call forwarding and press SELECT
4 Press p or q to select which account Call forward should apply to*, then
press SELECT
5 Press p or q to choose the desired option:
• Always
• Busy
• No answer
6 Press SELECT
to save
47