Using The Handset; Idle Screen; Making Calls - Snom M10 KLE User Manual

Using the Handset

This section describes how to use the handset to make calls and answer calls
This section also describes how to put calls on hold, transfer calls, and create
conference calls

Idle screen

The Idle screen appears after the phone is connected and
configured for your SIP PBX service. The Idle screen indicates
that you have no active or held calls
From the Idle screen, you can press:
•
CALLS
See "Displaying calls on the Call List" on page 33
•
LINE
When you make a call, the phone will use this account
See "Making calls" below
• MENU to view the main menu
See "Configuring the Handset" on page 47

Making calls

You can make calls to any phone number (an outside call), or you can call
another handset (an internal call)
To make an outside call:
1 Use the dial pad to enter the desired number
• Press
BACKSP
2 Call the number by pressing an idle line key (L1 to L4),
SPEAKER
When the call is answered, the active call screen appears
3 To end the call, press OFF or
If you wish to choose an outgoing account for the outside call:
1 Press
LINE
2 Press q p to select the dialing line (account)
or
3 Press
SELECT
4 Use the keypad to enter the desired number
The call will dial automatically when you have finished entering the number.
to view the Call List
to select another account (SIP Account)
if you enter an incorrect digit



â
DIAL
, or place the handset in the charger
END
23
or
DIAL