Deregistering The Handset - Snom M10 KLE User Manual

7 Press
YES
The handset displays the following message:
8 On the base station, press the HANDSET LOCATOR button for at least four
seconds, then release the button Both LEDs on the base station begin to
flash.
9 Press the # key on the handset to begin registration
The screen displays "Registering Please wait"
The process takes up to 10 seconds to complete When registration is
complete, the handset beeps and displays "Handset Registered"
If the handset fails to register, place it in the charger again for a few seconds,
remove it and repeat the registration procedure

Deregistering the handset

Before using the handset with a different base station, you must deregister the
handset from the base station to which it is currently registered
To deregister the handset:
1 Press MENU on the handset The Main Menu appears
to scroll to User settings and press SELECT
2 Press
q
3 Press to scroll to Registration and press SELECT
q
4 Press to highlight Deregistration and press SELECT
q
The handset screen displays a list of devices registered to the base station
5 Press to highlight the name of the handset you want to deregister, and
q
then press
SELECT
6 Enter the PIN, and then press SELECT to begin deregistration
The default PIN is 1592
The deregistration process takes up to 10 seconds to complete
When the handset deregisters, it beeps and the screen displays
"Handset is deregistered"
Note: The handset enters an energy-saving charging mode after being
deregistered All cordless telephone functions except handset-battery charging
are disabled Energy-saving charging mode is deactivated after the handset
registers to the base station


21