General Operation; Switching The Tv Set On And Off; Accessing Channels; Accessing Your Favourite Channels - THOMSON IFC230 User Manual

Tv lcd - plasma

Hide thumbs

Table Of Contents

Table of Contents

Switching the TV set on and off

To switch the TV set on:

- press the

on the remote control to switch the television on at

the last channel or AV programme you were watching,

- press the

on at the last channel you were watching,

- press any numeric button to switch the television on at the

corresponding channel,

- press the

button to switch the television on at the last

AV programme you were watching.

To put the TV set into standby mode, press the

button on the side of the TV set or the

remote control.The TV set remains powered up, but with low

energy consumption.

To switch off the TV set, unplug the mains socket from the

mains outlet.

Accessing channels

Using the numeric buttons:

for channels 1 to 9, press the corresponding numeric button;

for channels 10 to 99,

- press the tens digit for a few seconds to display it on the

screen, then press the units digit. For instance, for

programme 24, press and hold

; or

0/--

- press the

digits.

PR+/PR-

Using the

programmes are not included in the cycle unless you use the

buttons on the side of the TV set.

Using the list of programmes: refer to page 9.

To access the channel or AV programme previously being watched,

press the

RETURN

Accessing your favourite channels

You can define the channels you watch most often as your

favourite channels.This will allow you to create your own list of

channels which you can access more quickly using the

buttons on the remote control.

Follow the procedure described in point 5 on page 6 for

defining a channel as your favourite channel.

PRESETS

Press the

PR+/PR-

Select the

Favourites

select

When you change channels using the

remote control only your favourite channels will be available.

To cancel this option, select

keys

option.

Note: The

the channels set up, even if the

button on the side of the TV set, the

PR+/PR-

buttons to switch the television

button on the

to display

button to display "

", then enter the two

buttons: scroll through the channels. AV

button.

(red) button on the remote control.

keys

option. Use the

PR+/PR-

buttons on the

All channels

under the

buttons on the TV set allow you to access all

Favourites

option is selected

Accessing AV programmes

Press the

programme and scan through the other audio-visual programmes.

AV selection loop: AV1, AV2, AV3, CMP (= component,YPrPb or

YCrCb),VGA, HDMI.

Volume

Volume control: use the

TV set or press the

increase or decrease the volume.

Sound mute: press the

sound. Press this button again or the

it.

Headphone volume control: press the

remote control to display the volume control bar.Then use the

buttons to switch to the headphone volume control bar.

Use the

Displaying status information

In TV mode you can press the

remote control to display the number and name of the

relevant channel, the time and date, the type of sound and

format or zoom. If the sleep or turn-off timer is set the time

remaining until the TV set is switched into stand by is

displayed.

, then press

In PC mode you can press the

remote control to display the time and date, the type of

format, as well as the source of the signal being received and

the resolution. If the sleep or turn-off timer is set the time

remaining until the TV set is switched into stand by is

displayed.

When you switch the TV set on, change channels or exit Teletext,

the channel's number and name are displayed.

Note: If you activate the

Preferences

permanently (see page 17).

PR+/PR-

buttons to

PR+/PR-