Wireless Card; Removing The Wireless Card - Dell Inspiron 24-5491 Service Manual

Steps
1. Align the screw holes on the heat sink with the screw holes on the system board and the display assembly base.
2. In sequential order (as indicated on the heat sink), tighten the eight captive screws that secure the heat sink to the system board and
display assembly base.
Next steps
1. Install the system-board
2. Install the stand.
3. Install the bottom cover.
4. Install the back cover.
5. Follow the procedure in

Wireless card

Removing the wireless card

Prerequisites
1. Follow the procedure in
2. Remove the back cover.
3. Remove the bottom cover.
4. Remove the stand.
5. Remove the system-board
About this task
The following image indicates the location of the wireless card and provides a visual representation of the removal procedure.
26 Removing and installing components
shield.
After working inside your computer.
Before working inside your
shield.
computer.