Heat Sink; Removing The Heat Sink - Dell Inspiron 24-5491 Service Manual

Steps
With the positive-side facing up, insert the coin-cell battery into the battery socket on the system board and snap the battery into place.
Next steps
1. Install the system-board
2. Install the stand.
3. Install the bottom cover.
4. Install the back cover.
5. Follow the procedure in

Heat sink

Removing the heat sink

Prerequisites
1. Follow the procedure in
2. Remove the back cover.
3. Remove the bottom cover.
4. Remove the stand.
5. Remove the system-board
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
24 Removing and installing components
shield.
After working inside your computer.
Before working inside your
shield.
computer.