Steps
1. Align the screw holes on the speakers with the screw holes on the display-assembly base and route the cable through the routing
guides on display-assembly base.
2. Replace the eight screws (M3 4+7.1xZN) that secure the speakers to the display-assembly base.
3. Route the speaker cable through the routing guide on display-assembly base and connect the speaker cable to the system board.
Next steps
1. Install the
system-board
2. Install the stand.
3. Install the
bottom
cover.
4. Install the
back
cover.
5. Follow the procedure in
Microphones
Removing the microphones
Prerequisites
1. Follow the procedure in
2. Remove the
back
cover.
3. Remove the
bottom
cover.
4. Remove the stand.
5. Remove the
system-board
6. Remove the speakers.
About this task
The following image indicates the location of the microphones and provides a visual representation of the removal procedure.
shield.
After working inside your
computer.
Before working inside your
shield.
computer.
Removing and installing components
35