Table of Contents
Advertisement
Installing the back cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the back cover and provides a visual representation of the installation procedure.
Steps
Align the slots on the back cover with the slots on the computer and press along the side to snap the back cover into place.
Next steps
1. Follow the procedure in
Bottom cover
Removing the bottom cover
Prerequisites
1. Follow the procedure in
2. Remove the
back
cover.
About this task
The following image indicates the location of the bottom cover and provides a visual representation of the removal procedure.
12
Removing and installing components
After working inside your
computer.
Before working inside your
computer.
Advertisement
Table of Contents
