Table of Contents
Advertisement
Component
Base panel
Display panel
Media-card reader
Back cover
Removing the back cover
Prerequisites
1. Follow the procedure in
CAUTION:
When servicing the computer, place it on an elevated, clean and flat surface. Place the display flat on the
surface with the stand hanging over the edge. It is recommended to remove the stand to avoid accidental damage to
the computer display during servicing.
About this task
The following image indicates the location of the back cover and provides a visual representation of the removal procedure.
Steps
1. Place your palm in the middle of the back cover then pry the back cover from the display-assembly base starting from the top corners.
2. Remove the back cover from the display-assembly base.
Secured to
Display-assembly base
Display-assembly base
Display-assembly base
Before working inside your
Screw type
Quantity
M3x5
19
M3 0.5x5
11
M2x3
1
computer.
Screw image
Removing and installing components
11
Advertisement
Table of Contents
