Steps
1. Align the screw holes on the stand with the screw holes on the display-assembly base and slide the stand on the display-assembly
base.
2. In the sequential order indicated on the stand, replace the eight screws (M3x4) that secure the stand to the display-assembly base.
Next steps
1. Install the
bottom
cover.
2. Install the
back
cover.
3. Follow the procedure in
Hard drive
Removing the hard drive
Prerequisites
1. Follow the procedure in
2. Remove the
back
cover.
3. Remove the
bottom
cover.
4. Remove the stand.
About this task
The following image indicates the location of the hard drive and provides a visual representation of the removal procedure.
16
Removing and installing components
After working inside your
computer.
Before working inside your
computer.