SMC Networks FieldServer FS-EZX-MOD-BAC Startup Manual page 12


Select Network Settings.

Modify the IP address (N1 IP address field) of the EZ Gateway Ethernet port.

If necessary, change the Netmask (N1 Netmask field).

Type in a new Subnet Mask

If necessary, change the IP Gateway (Default Gateway field)

Type in a new IP Gateway

Note: If the EZ Gateway is connected to a router, the IP Gateway of the EZ Gateway should
be set to the IP address of the router that it is connected to.

Click Update IP Settings, then click on the Change and Restart to restart the Gateway and
activate the new IP address. Note that if the GUI was open in a browser, the browser will need
to be pointed to the new IP address of the EZ Gateway before the GUI will be accessible
again.
Page 12 of 25
Modbus to BACnet Start-up Guide