Using Your Sunbeam Vacuum Blender - Sunbeam NutriSeal PBT7200SS User Manual

Using your Sunbeam Vacuum Blender

Blending with the Food Modes
(Smoothie, Food Chop)
Why use the Food Modes (Pre-
programmed Functions) ?
Using these functions provides total ease
of use. By selecting Smoothie or Food Chop
your blender knows exactly what speed to
select and how long to blend for, so you
don't need to worry. This ensures that
you get the best consistency whether you
are blending a green smoothie or a milk
shake (Smoothie Function) or preparing a
hummus dip or salsa (Food Chop Function).
The digital timer will indicate how long until
the blending is finished.
Important: Do not overfill the blending Jug
past the MAX fill line. Overfilling may create
a hazard and damage the blender.
1. Press the Power button to turn the
blender on.
The Vacuum Arm Light Indicator will
light up.
2. Turn the Seal Selector (cap) (Figure
6) on the Jug Lid to the appropriate
selection:
- Blend only
- Vac/Vac+Blend
Vac/Vac+Blend
Blend Only
Remove Cap
Figure 6
3. (Optional) To vacuum blend, press the
Vac + Blend (Auto) Button.
4. Press one of the below buttons to select
a pre-programmed setting:
- Smoothie
- Food Chop
5. When ready to begin, press the Start/
Stop button. The blender will stop
automatically when blending is
complete.
Note: Press the Start/Stop to cancel the
program at any time.
6. Once the pre-programmed function has
ended, press the Power button to turn
the blender off.
Note: This appliance is pre-
programmed to turn off automatically if
not used for a period of several minutes.
All lights will turn off when the unit
automatically powers down.
7. Press the Arm Release button to lift
the Arm Lock Up on the NutriSeal
Vacuum Arm (Figure 7).
Figure 7
8. Holding the handle, turn the blending
Jug counter-clockwise.
9. Lift the blending Jug up and away from
the Motor Base.
10. Push the Arm Lock on the NutriSeal
Vacuum Arm down.
11. Push down on the Seal Selector (cap)
to release the vacuum seal (if Vacuum
function used).
12. Turn the Seal Selector (cap) (Figure
6) on the Jug Lid to the Remove Cap
position and remove the Seal Selector
(cap) from the Jug lid.
13. Take the Jug Lid off the blending Jug.
Important: Pushing down on the Seal
Selector (cap) or turning the Seal
Selector (cap) away from the Vac/
Vac+Blend position introduces air to
your drink/meal.
7
TM
TM