Using Your Vacuum Seal Cup Accessory - Sunbeam NutriSeal PBT7200SS User Manual

Using your Vacuum Seal Cup Accessory

Why use your Vacuum Seal Cup ?
This function is most useful for vacuuming
your blended smoothie in the Vacuum Seal
Cup.
After you have blended in the 1.5L Tritan
jug, decant the smoothie into your Vacuum
seal Cup, and use the Vacuum Storage option.
Your smoothie will stay nutrient rich and fresh
for up to 24 hours allowing you to blend the
night before and enjoy fresh in the morning.
Note: You cannot blend in the Vacuum Seal
Cup.
1. Pour your blended drink or meal into
the Cup.
2. Secure the Cup Lid onto the Cup by
aligning the notch in the Cup to the tab
on the Cup Lid (Figure 1).
3. Press the Arm Release Button to lift the
Arm Lock on the NutriSeal™ Vacuum
Arm (Figure 2).
4. Place the Vacuum & Seal Cup on
the Motor Base so that the Cup Lid's
vacuum port aligns with the NutriSeal™
Vacuum Arm's vacuum port.
5. Press the Power button to turn the
blender on.
The NutriSeal™ Vacuum Arm Light
Indicator will light up.
Figure 1
6. Push the Arm Lock on the NutriSeal™
Vacuum Arm down (Figure 3).
7. Press the Vacuum (Storage) button.
8. When ready to begin, press the Start/
Stop button. The blender will stop
TM
automatically when vacuuming is
complete.
Note: Press the Start/Stop button to
cancel the program at any time.
9. Press the Power button to turn the
blender off.
Note: This appliance is pre-
programmed to turn off automatically if
not used for a period of several minutes.
All lights will turn off when the unit
automatically powers down.
10. Lift the Arm Lock on the NutriSeal™
Vacuum Arm up.
11. Lift the Vacuum Seal Cup up and away
from the Motor Base.
12. Push the Arm Lock on the NutriSeal™
Vacuum Arm down.
13. To drink from the Vacuum Seal Cup,
press the Vacuum Release Button on
the Cup Lid.
Note: Pressing the Vacuum Release Button
introduces air to your drink/meal.
Figure 2
9
Figure 3