Support Software; Table 6-4. Phoenix' Nubios Boot Block Checkpoint Codes - RadiSys EPC - 6A Hardware Reference Manual

Beep code
Beep code

Support Software

The following programs are available for the EPC-6A:
Item
RadiSys BIOS
reflash tools and
images
BIOS directory
Sample directory AUTOEXEC.BAT Sample AUTOEXEC.BAT file which you can use as a
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Post code
D2h
D4h
D6h
D8h
DAh
DCh
Table 6-4. Phoenix NuBIOS Boot Block Checkpoint Codes
™
Post code
E2h
E3h
E4h
E5h
E6h
E7h
E8h
E9h
EAh
EBh
ECh
EDh
EEh
Filename Description
ABORTSWI.EXE When placed in the AUTOEXEC.BAT program, this file
alters the EPC-6A's boot behavior via the toggle switch.
FLSHDUMP.EXE Dumps the contents of the EPC-6A's RFA to a 1MB file.
This utility can be used to create "Gold Disks" for the
RFA.
UTILS.TXT Describes the contents of the UTILS directory.
BIOS512K.ROM 512K bios image (used with the FBD command in
forced recovery).
BIOS.ROM 256K bios image (used with the BIOS command in
forced recovery).
BIOS.TXT Describes BIOS images.
template for the user AUTOEXEC.BAT file.
Chapter 6: Error Messages
Checkpoint description
Unknown interrupt error
Pending interrupt error
Initialize option ROM error
Shutdown error
Extended Block Move
Shutdown 10 error
Checkpoint description
Initialize the system controller
Initialize refresh counter
Check for Forced Flash
Check HW status of ROM
BIOS ROM is OK
Do a complete RAM test
Do OEM initialization
Initialize interrupt controller
Read in bootstrap code
Initialize all vectors
Boot the Flash program
Initialize the boot device
Boot code was read OK
39