auna KR-140 DAB Manual page 40

EN
40
FM settings
In FM mode, the "Scan settings", "Audio setting" and "System" items can be
set in the FM menu. To do this:
• In FM mode, short press any one of button to turn On the display's
backlight if it is in dark mode.
• Long press the "INFO / MENU" button to call FM menu (see below
picture):
• Chose "Scan setting / Audio setting / System" the desired item by using
rotates the "Adjustment (16)" button to [+] or [-] and short press the
"Adjustment (16)" button to enter the desired item.
Scan Setting
Choose "Scan setting" > choose "Strong stations only / All stations" as you
desired:
• Strong station: scan should only stop at stations with strong signal.
• All stations: scan at all found stations, including ones with weak signals.
Audio Setting
Choose "Audio setting" > choose "Stereo Allowed/ Forced mono" as you
desired:
• Stereo Allowed: enter to play in stereo even in the event of weak FM
reception. (stereo switching noise issue may happen)
• Forced mono: forced to play in mono if in the event of weak FM
reception.
System
See the chapter „System Settings".