auna KR-140 DAB Manual page 38

EN
38
Manual tune station
In now receiving interface screen:
• Short press the "TUN (10)" or "TUN (11)" button for steps frequency
down or up to receive next station, each press will step down or up the
frequency by 0.05 MHz.
• Short press the "TUN (10)" or "TUN (11)" button quickly until to your
desired radio frequency of radio station.
• Long press the "TUN (10)" or "TUN (11)" button to entry into manual
searching mode. This mode allows keeping tuning down / up and being
stop until next radio station frequency is received.
Save manual tuned frequency into preset
After the above mentioned manual tune station, the tuned/current station's
frequency can be stored by the following steps:
• Long press the "PRE/MEM (6)" button to entry "Preset Store" menu, a
"<01: (Empty)>" item will show for use, you can change it number up/
down, from 01 to 30, by "TUN (10) / TUN (11)" button which is you desired .
• Then, short press the "AMS (12)" button to confirm, a "Preset 01 Stored"
message is displayed and the screen will switch back to now receiving
interface.
• The device allows to store up to 30 stations in preset list.
Auto Memory Stations (AMS)
In now receiving interface screen:
• Long press the "AMS (12)" button to entry auto memory stations
function;
• The FM radio will turn into AMS mode and scanning up, from 87.50
MHz to 108.0 MHz, a circle of FM frequency range. Those receivable
FM station's frequencies will be programmed and saved into preset list
(PRE) automatically.
Note: All previous preset radio frequencies (if have) will be overwriting
when every time you using the AMS function.