Getting Started - auna KR-140 DAB Manual

EN
34

GETTING STARTED

Aligning the telescopic antenna
The number and quality of broadcast stations depends on the reception
conditions at the location of the device, as well as the telescopic with
stand location where placed. Excellent reception can be achieved with the
telescopic antenna.
• Align the telescopic antenna location and extend it to its full length.
• Precise alignment of the telescopic antenna is important, especially in
the fringe areas of the DAB/DAB+/FM reception. Check the position of
the nearest radio mast at your region could need.
• Start the first scan at the window facing the radio mast.
• Radio reception may be restricted in bad weather.
• Do not touch the telescopic antenna when receiving a station. This can
be impeded reception and lead to sound dropout.
Power Connection and MODE Button
Plug the 5.5 mm DC plug of provided AC to DC power adapter into "DC
INPUT Socket (3)" which located on back of BT Kitchen clock device.
"Welcome to Digital Radio" appears for few seconds in LCD display. The
device switches to FM mode and stay at frequency 87.5MHz as default
waiting for action.
• Choose the desired mode (FM / DAB / BT ) to setup and / or pre-
settings the device by short press the „MODE (4)" button.
• Long press the "MODE (4)" button to power Off the device.
• Long press the "MODE (4)" button again to power On.
Note: For energy saving, the LCD display's backlight may turn off/dark
after some seconds, if no key button activity. It's depending on factory
default, as well as user settings. Short press any one of button can turn
backlight on from off/dark.
The