auna KR-140 DAB Manual page 42

EN
42
Change station Up / Down
In now receiving interface screen:
• Short press the "TUNE (10) / TUNE (11)" button, a "Station list" item with
station name will show for use.
• Then, Short press the "TUNE (10) / TUNE (11)" button to change the
station to you desired.
• Then, short press the "AMS (12)" button to confirm.
To store station into Preset
• Select a desired DAB station by short press the "TUNE (10) / TUNE (11)"
button.
• Then, long press the "PRE/MEM (6)" button to entry "Preset Store"
menu, a "<1: (Empty)>" item will show for use, you can change it number
up/down, from 1 to 30, by "TUNE (10) / TUNE (11)" button which is you
desired.
• Then, short press the "AMS (12)" button to confirm, a "Preset 01 Stored"
message is displayed and the screen will switch back to now receiving
interface.
• Repeat the above steps to preset the other DAB stations into the
remaining space of the Preset Store.
• The device allows to store up to 30 stations in list.
Select a preset station (Preset Recall)
In now receiving interface screen:
• Short press the "PRE/MEM (6)" button to entry "Preset Recall" menu,
a "<1: station name>" item will show for use, you can change it number
up/down, from 1 to 30, by "TUNE (10) / TUNE (11)" button which is you
desired.
• Then, short press the "AMS (12)" button to confirm, the station will
switch to Core at the same time.
View DAB Station Information:
In now receiving interface screen, short press the "INFO / MENU (8)" button
repeatedly to view information transmitted by of the current station:
Signal strength bar > Program type > Multiplexer name > Frequency >
Signal Information > Bit rate > Time > Date > Information...