Set Alarm And Wake-Up Function - auna KR-140 DAB Manual

SET ALARM AND WAKE-UP FUNCTION

Alarm time set
• Short press the "ALARM (13)" button can entry and select "Alarm 1 setup /
Alarm 2 setup" interface screen.
• Short press the "Adjustment (16)" button to entry Alarm 1 Wizard /
Alarm 2 Wizard menu, the hour value of On time blinking waiting for
input. (On time HH:MM)
• Rotates the "Adjustment (16)" button to [+] or [-] for selects value to
desired hour for alarm.
• Short press the "Adjustment (16)" button to confirm the hour set and
jump to minute set.
• Rotates the "Adjustment (16)" button to [+] or [-] for selects value to
desired minute for alarm.
• Short press the "Adjustment (16)" button to confirm the minute set and
jump to next item set.
Use the same steps of button control to the completes the remaining item's
set in below:
• Duration: „15 / 30/ 45 / 60 / 90" minutes
• Source: "Buzzer / DAB / FM" (by buzzer / last listened)
• Schedule: "DAILY / WEEKDAYS / ONCE"
• Level: "bar level adjustment" (For Buzzer/Radio)
• Alarm: "Off/On" (Off=deactivate; On=activate)
Those settings of Alarm 1 and/or Alarm 2 will be saved in memory for recall
if you choose "Alarm Off" in last selection and confirmation. Choose "Alarm
On" to activate the alarm function. The alarm symbol with 1 and/or 2 will
appears at right up corner in the LCD display as identify.
Deactivate the Alarm 1 / Alarm 2 function
• Short press the "ALARM (13)" button can entry and select "Alarm 1 setup /
Alarm 2 setup" interface screen.
• Long press the "ALARM (13)" button, then you will see the alarm symbol
with 1 and/or 2 will disappears in the LCD display as identify.
EN
49