IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons, including the following:
1)Read and understand all instructions.
2)Follow all warnings and instructions marked on the product.
3)Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4)Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool.
5)Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious
damage to the product.
6)Slots and openings in the cabinet and the back or bottom are provided for ventilation, to protect it from
overheating these openings must not be blocked or covered The openings should never be blocked by plac-
ing the product on the bed, sofa, rug or other similar surface. This product should never be placed near or
over a radiator or heat register. This product should not be placed in a built-in installation unless proper
ventilation is provided.
7) This product should be operated only from the type of power source indicated on the appliance. If you
are not sure of the type of power supply to your home, consult your dealer or local power company.
8)Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused
by persons walking on it.
9)Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
10)Never push objects of any kind into this product through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any
kind on the product.
11) To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service
faciI4 when some service or repair work is required. Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is
subsequently used.
12) Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
A) When the power supply cord or plug is damaged or frayed. B) If liquid has been spilled into the prod-
Page 31
Need help?
Do you have a question about the Wi-Fi Power Analyzer and is the answer not in the manual?