Berkeley Varitronics Systems Wi-Fi Power Analyzer Manual page 27

Figure 30
If the figure 30 message box appears, the Wi-Fi Power Analyzer did no respond to a command
request from the PC. Possible requests are Send data on/off, Unit data, Remote keypad or the
Contrast slider. Check that the Wi-Fi Power Analyzer is ON, batteries are not low and the USB con-
nection is intact.
Figure 31
If the application is started and can't connect to the Wi-Fi Power Analyzer the message box in figure
31 is displayed. This message box will appear if the application is started with the Wi-Fi Power
Analyzer off or not connected to the USB port.
Please note that the application can be used to replay prerecorded data files without a Wi-Fi Power
Analyzer being connected. If this is the desired use for the application, just click the OK button and
proceed to replaying files.
Page 26