3-10 Head Open Switch Removal/Replacement
REFER TO THE ACCOMPANYING ILLUSTRATIONS
Switch removal:
1.
Remove the printer chassis according to the instructions in Section 3-4.
2.
Insert a flat-bladed screwdriver under the switch body and gently pry it
up to detach from the chassis protrusions.
3.
Unplug the two connectors.
Switch installation:
Reverse the above steps to install the switch.
46
Rev B
All manuals and user guides at all-guides.com
UNPLUG
CONNECTORS
GENTLY PRY THE SWITCH
BODY WITH A FLAT-BLADED
SCREWDRIVER
SATO SERVICE MANUAL
CX Series Printers
SCREWDRIVER
BLADE