1-1. Checking the ROM and Software Version
When connecting the peripheral equipment in the list below to HDC-F950, be sure
to check that the ROM and software version on each peripheral device is corre-
sponding to the camera to be connected.
If the ROM and software version is lower than the specified below, be sure to
perform ROM replacement and updating the software.
If ROM replacement and updating the software are required, contact your local Sony
Sales Office/Service Center.
ROM
Peripheral equipment
Board name
MSU-700A/750
CPU-293/CPU-286
RCP-720/721
MPU-79
RCP-730/731
MPU-79
RCP-740/741
MPU-79
RCP-700/701
MPU-92
RM-B150
CPU-266
Software
Peripheral equipment
Board name
RCP-750/751
MPU-123
RM-B750
MPU-124
HDC-F950 IMM
Section 1
Installation Overview
Ref No.
Rom version
IC5, IC6/IC5, IC6
Ver. 1.10 or higher
IC10
Ver. 2.73 or higher
IC10
Ver. 2.73 or higher
IC10
Ver. 2.73 or higher
IC6
Ver. 2.73 or higher
IC4
Ver. 1.00 or higher
Software version
Ver. 1.01 or higher
Ver. 1.00 or higher
1-1 (E)