Table of Contents
Advertisement
DETAIL 1 page
<DETAIL 1>
[M] [WHT][BLK]
LEVEL
:
0
LIMITER
:
0
CRISPEN
:
0
HV RATIO
:
0
FREQ
:
0
LVL DEP
:
0
DETAIL
:
ON
LVL DEP
:
ON
Item
Setting
_99 to 99
LEVEL
LIMITER
_99 to 99
M/WHT/BLK
_99 to 99
CRISPEN
HV RATIO
_99 to 99
_99 to 99
FREQ
_99 to 99
LVL DEP
DETAIL
ON, OFF
LVL DEP
ON, OFF
*1
ABS
*1: Execute by pressing the rotary encoder.
3-12 (E)
(Display is initial values.)
0
0
ABS
Description
Sets the general level of the detail signal.
Sets the level for clipping the excessive detail signal.
Sets the level for suppressing the noise components contained in the
detail signal.
Sets the ratio between H detail signal and V detail signal.
Sets the frequency of the H detail signal.
Sets the level for suppressing the detail amount in the dark part.
Sets the function for attaching the detail signal for improving the
resolution to ON or OFF.
Sets the level depend function to ON or OFF.
Sets the ABS mode to ON or OFF.
To turn on the ABS mode
Press the rotary encoder to display the ABS in reverse video.
When the ABS mode setting is ON, display the numbers except
LIMITER M in reverse video, and be able to confirm the absolute
values.
To turn off the ABS mode
Press the rotary encoder again.subject.
HDC-F950 IMM
Advertisement
Table of Contents
