Table of Contents
Advertisement
OTHERS2 page
<OTHERS 2>
MENU RESUME : OPE MENU
DATE TYPE
: 1 Y/Mn/D
WHITE MEMORY: 2
COLOR BAR
: FULL 16:9
CHU OUTPUT
: 4:4:4
CHU OPE MODE: NORMAL
META DATA
: ON
Item
Setting
MENU RESUME
OPE MENU,
OFF, ALL
DATE TYPE
1 to 6
WHITE MEMORY
2, 10
COLOR BAR
FULL 16 : 9 ,
SMPTE 16 : 9 ,
FULL 4 : 3 ,
SMPTE 4 : 3
CHU OUTPUT
4 : 4 : 4, 4 : 2 : 2
CHU OPE MODE
FORCE CCU,
NORMAL
META DATA
ON, OFF
f)
Setting
Output signal
4 : 4 : 4
4 : 4 : 4 (RGB)
4 : 2 : 2
4 : 2 : 2 (YPbPr)
HDC-F950 IMM
(Display is initial values.)
Description
Sets the menu screen displayed when starting the menu.
OPE MENU : Starts to display from the page in the operation menu,
which was displayed at powering off of the previous time.
OFF :
Starts to display from the first page (VF DISPLAY) in the
operation menu.
ALL :
Displays the menu screen, which was displayed at
powering off of the previous time.
n
To display the TOP menu, refer to Section 3-2.
Sets the date.
1: Y/Mn/D Year/Month/Date (Month should be showed by the figure.)
2: Mn/D
Month/Date (Month should be showed by the figure.)
3: D/M/Y
Date/Month/Year
4: D/M
Date/Month
5: M/D/Y
Month/Date/Year
6: M/D
Month/Date
Sets the number of white balance memory.
2: White balance memory can be set to A and B of WHITE BAL
switch (total 2).
10: White balance memory can be set to A and B of each CC filter
and WHITE BAL switch (total 8).
Sets the color bar.
FULL 16 : 9:
100 % color bar of 16 : 9
SMPTE 16 : 9: 75 % color bar of 16 : 9
FULL 4 : 3:
100 % color bar of 4 : 3
SMPTE 4 : 3: 75 % color bar of 4 : 3
Sets the HD-SDI output format.
Sets the switch operation mode of the camera when the camera
control unit (CCU) is connected.
FORCE CCU: Once the CCU is connected to the HDC-F950, the
operations of the following switches are disabled even
if the CCU is disconnected.
GAIN, OUTPUT, WHITE BAL, SHUTTER,
AUTO W/B BAL
NORMAL:
When the CCU is connected:
The above switches operations are disabled
When the CCU is disconnected:
The above switches operations are enabled
Sets the meta data output function ON or OFF.
n
The meta data is output from only the HD SERIAL LINK A OUT
connector.
CCU connector
HD SERIAL LINK A
OUT connector
O
O
O
O
f)
HD SERIAL LINK B
OUT connector
O
X
3-23 (E)
Advertisement
Table of Contents
