Commissioning
6.2.2
Request information
When the unit is in bus operation, a variety of information can be called up.
Press the following control buttons to access this information:
ENTER
6.2.3
Operating modes
Selection from the operating level:
•
Press and hold down
•
Press and release
•
Release
•
The position is displayed in % or as a rotation angle
Operating mode
1.1
Positioning with fixed setpoint
Use
1.2
Manual adjustment
Adjust with
1.3
Manual adjustment
Adjust with
1) Positioning not active.
2) for high-speed mode: Press
28 - EN
Control buttons
as often as required to display the selected operating mode
or
to adjust the setpoint
1)
in the operating range
2)
or
1)
in the sensor range
2)
or
and
TZIDC-200, TZIDC-210, TZIDC-220
Cyclic communication:
Displays the setpoint in % and the setpoint status.
Acyclic communication:
Displays the communication status.
Displays the bus address and operating mode.
Displays the software revision.
Mode indicator
conf
conf
conf
simultaneously.
Action
Position indicator
°
C
%
mA
conf
°
C
%
mA
conf
°
C
%
mA
conf
CI/TZIDC-200/210/220-EN
°
C
%
mA
°
C
%
mA
°
C
%
mA